XGW户外开闭所

适用范围 Scope of Application

XGW 户外开闭所是公司采用国外技术，根据我国各区域配电网络特点和城市配网电缆化改造的实际情况，开发、生产的具有水准的充气式户外环网柜。

XGW 户外开闭所采用全密封全绝缘环网开关设备，该开关设备具有模块化、可扩展、全绝缘、全密封、 安全可靠等优点，适用于任何恶劣环境，被广泛应用于工业园区、居民区、街道、机场、各种建筑物、繁华商业中心等场所。

XGW 户外开闭所标准电压等级12kV、24kV，可扩展配网自动化功能，实现环网柜的智能化，让电网更坚强更智慧。

XGW Outdoor Switching Station is an inflatable outdoor ring main unit developed and produced by the company using foreign professional technology, based on the characteristics of distribution networks in various regions of China and the actual situation of cable transformation in urban distribution networks, with international professional standards.

XGW outdoor switchgear adopts fully sealed and insulated ring network switchgear, which has the advantages of modularity, scalability, full insulation, full sealing, safety and reliability, and maintenance free. It is suitable for any harsh environment and is widely used in industrial parks, residential areas, streets, airports, various buildings, bustling commercial centers and other places.

The standard voltage levels for XGW outdoor switchgear are 12kV and 24kV, which can expand the automation function of the distribution network and achieve the intelligence of the ring main unit , making the power grid stronger and smarter.

正常使用条件 Regular service conditions

◇ 环境温度：温度+40℃，低温度-15℃，日平均温度不超过35℃；

◇ 相对湿度：日平均值不超过95%，月平均值不超过90%；

◇ 风速：不超过35m/s；

◇ 污秽等级：Ⅲ级；

◇ 地震烈度：8 度；

◇ 地面倾斜度：不大于3 度；

◇ 安装地点：安装在没有火灾，爆炸或剧烈震动、通风良好、无腐蚀性气体的场所。

条件

◇ 当设备安装在海拔高度为1000 米以上时，需特别注明，以便公司在制造时对SF6 压力进行调整。

◇ 如果涉及恶劣条件，请务必向公司咨询, 以便提供设计或降容指导。

◇ Ambient temperature: Maximum temperature 40℃ , minimum temperature -15℃ , maximum daily average temperature not exceeding 35℃ ;

◇ Relative humidity: Daily average not exceeding 95%, monthly average not exceeding 90%;

◇ Wind speed: Not exceeding 35 m/s;

◇ Pollution level: Level III;

◇ Seismic intensity: 8 degrees;

◇ Ground inclination: Not greater than 3 degrees;

◇ Installation location: Install in places without fire, explosion, or severe vibration, with good ventilation and no corrosive gases. Special Conditions

◇ When the equipment is installed at an altitude above 1000 meters, it must be specially noted so that the company can adjust the SF6 pressure during manufacturing.

◇ If special harsh conditions are involved, be sure to consult the company to provide special design or derating guidance.